- Size: 7.5 X 7.5 Silver etch color
- All orders include a squeegee and instructions.
Installation Instructions:
- Clean surface completely using a non-abrasive cleanser. Most cleaners and products containing ammonia are NOT Safe! The best solution recommends using soap and water for this process
- Dry the surface. Make sure the there is no soap left on it.
- Spray a fine mist of water on the surface. This will allow you to reposition the graphic some if needed.
- Remove the opaque white backing from the transfer backing. Make sure that the sticker stays on the transfer backing.
- Carefully apply the sticker to the desired surface OR place the sticker face up on a flat surface. Position the window above the sticker for placement, then press the window down. Go to Step 6. NOTE: It is best if you apply the top or bottom of the appliqué and squeegee up or down. This has proven the best results.
- Using a squeegee, or a credit card, remove any air bubbles, working out from the center. Remove as many as possible, any trapped bubbles can be left.
- Remove the transfer backing from the sticker.
- If you notice small air bubbles they will be gone after a few days. Do not poke holes to get rid of bubbles. Poking holes is a last resort.
NOTE: When poking holes you may end up with a rough edge around the poked area. We are not responsible for damage to purchased graphics caused by incorrect or poorly executed installations!
