Vandal Resistant Illuminated Momentary Switch - Silver - 22/19mm - Green Dot
VSW22-MOM-SL-DOT-GN
The vandal resistant momentary on/off switch is the ideal switch for computer modding enthusiasts. A momentary switch is typically used for a PC's power and reset button. When turned on, the ring or dot around the push button illuminates in the specified color. Easy to install and will fit it many case switch holes, on a regular 3.5 or 5.25 inch bay cover, or wherever you chose to mount it.
Cable choices
|
Add optional cable to your switch |
Sleeving Service
|
Optional Switch Cable Sleeving |
Sleeving Materials
|
Sleeving is the sheathing that we cover the cable with |
|
Heatshrink is the 1/2 inch piece of material used to seal the end of the sleeve. |
Estimación de envío
36 unidades disponibles
$17.90
/
Los gastos de envío se calculan en la pantalla de pago.
Retiro disponible en Performance-PCs.com
Normalmente está listo en 1 hora
Disponibilidad de recogida
-
Performance-PCs.com
Retiro disponible, normalmente está listo en 1 hora1701 ROBERT J CONLAN BLVD NE
STE 5
PALM BAY FL 32905-3431
Estados Unidos+13217259969
Details
The vandal resistant momentary on/off switch is the ideal switch for computer modding enthusiasts. A momentary switch is typically used for a PC's power and reset button. When turned on, the ring or dot around the push button illuminates in the specified color. Easy to install and will fit it many case switch holes, on a regular 3.5 or 5.25 inch bay cover, or wherever you chose to mount it.
Features
- Front Panel Mounting
- Ring or Dot Illuminated
- 22mm bezel diameter
- 19mm shaft (install) diameter
- S.P. Push to Make
- 50mA, 24V dc contact rating Switch
- Bright Daylight LEDs
- Separate LED Terminals
Specifications
- Terminations: (2.8mm tabs)
- Switching: S.P. Push to make, tactile S.P.or Push/Latch
- Max. Rating: 50mA, 24V d.c. switch
- Contact Resistance: <100mO.
- Insulation Resistance: >103 MO.
- Dielectric Strength: Contact to Panel >2.0kV
- Contact to Contact 1500V Contact
- Operating Temp. Range: .30C to +70C
- Sealing (Front of panel only): Protection Classification: IP66 EN60529
- Materials:
Switch assembly: V-0 rated Polyamide (Nylon)
Tags: Copper Alloy
Terminals: Copper Alloy
Switch Body & Button: Aluminum
Lens and Lens Body: Polycarbonate
O rings: Nitrile and Silicone
Contact Plate: Gold Plated - LEDs (ratings @ 20mA) Blue: 1500 mcd 3.0-12.0 V
NOTE: LED is rated for 3.0-12.0 Volts and the motherboard LED headers are 3.3V. This is acceptable
All switches are tested in house before shipment. Absolutely NO returns of switches that have a burnt out LED!
